© JPU Reinigungsprodukte GmbH 2024
M33 White Polishing
The white Janex Super Pads are completely free of abrasives. As non-abrasive polishing pads they are designed for final polishing. The softest pads in this Super Pad category are ideal for applying all types of care oils, especially on sensitive and splinter-prone softwood floors. The strengths of the white pads lie clearly in the care application. The reduced degree of hardness has no negative impact on tool life. You should use a harder pad for cleaning purposes.
M31 Tan Polishing
The tan Janex Super Pad is ideal for buffing and light cleaning. Removes light scuff marks and dirt while shining floors.
M34 Red Spray Buff
The red Janex Super Pads are among the softest of the classic cleaning pads. They are suitable for the gentle cleaning of even the most sensitive floors, for which the harder pads are no longer an option. Despite the rather light cleaning effect, the red pads are efficient enough to deal with intensive local soiling.
M35 Blue Scrubbing
With their very rough surface, the blue pads are softer than the green pads. They are very well suited for the care film renovation. Also for the care film cleaning of elastic floor coverings such as linoleum, PVC or rubber. The abrasive qualities of the blue Janex Super Pad lie between the green and red pad and are sufficiently pronounced to reliably remove the old care film without damaging the floor layer underneath.
M30 Green Scrubbing
With a medium degree of hardness, these green pads are primarily suitable for applying as a massage pad. Various basic treatment emulsions or color oils can be efficiently worked into wooden surfaces. The Pads are also suitable for easy basic cleaning (removal of footprints on all types of floors). Green pads offer the right compromise when the use of harder pads is not appropriate and softer pads are not efficient enough.
M36 Brown Stripping
The brown Janex Super Pads are ideal for all intensive cleaning work, including the thorough removal of layers of dirt on wooden floors. The abrasive particle concentration is high, so that coatings such as wax coverings can be removed - on softer floors you should first check for scratch resistance before using these pads. We recommend less hard pads for sensitive / soft woods.
M32 Black Stripping
The hardest Janex Super Pads are ideal for all intensive cleaning work, including the thorough removal of dirt layers on wooden floors. The abrasive particle concentration is high, so that coatings such as wax coverings can be removed. On softer floors you should first check for scratch resistance before using these pads. We recommend less hard cleaning pads for sensitive / soft woods.
M29 HiPro Superpad
The Janex HiPro Superpad consists of polyester fibers which have been processed in an open woven structure. Abrasive particles are distributed throughout the fabric and attached with a very durable adhesive. This pad has a very high abrasive content and has superior chemical resistance properties.
M28 HP 500
The HP 500 Janex Super Pad consists of polyester fibers that have been processed in an open fleece structure. Abrasive particles are distributed throughout the fabric and attached with a very durable adhesive. This pad has a high abrasive content and has superior chemical resistance.
M27 Titan
The Titan Superpad consists of polyester fibers that have been processed in an open fleece structure. Abrasive particles are distributed throughout the fabric and attached with a very durable adhesive. This pad has a very high percentage of abrasive abrasives and has outstanding chemical resistance.
Tips:
Product care
You can extend the longevity of this product by cleaning the pads with increased water pressure with a hose (spray nozzle). To remove stubborn dirt, the pad can be soaked in detergent or diluted stripper solution before washing.
Instructions for use
The floor should be swept or cleaned before using the pads. The pads should be used on a single disc machine or scrubbing machine. At the end of the process, the cleaning solution used is removed with a damp cloth or a wet vacuum. Then the floor must be wiped again. Let the floor dry before applying a new layer.